diff --git a/docs/devices/rb3.rst b/docs/devices/rb3.rst
index 4d42b7d..f5c53e8 100644
--- a/docs/devices/rb3.rst
+++ b/docs/devices/rb3.rst
@@ -6,12 +6,117 @@
 RB3
 ===
 
-RB3 is currently one the only 2 supported dev-boards listed on
+RB3 is one of the supported dev-boards listed on
 `source.android.com <https://source.android.com/docs/setup/create/devices>`_.
 
 The vendor-packages required to build RB3 images with AOSP are
-listed `here <http://releases.devboardsforandroid.linaro.org/vendor-packages>`_
+listed `here <http://releases.devboardsforandroid.linaro.org/vendor-packages>`_.
 
-The `DB845c wiki <https://wiki.linaro.org/AOSP/db845c>`_ provides links to the
-documentation for using these devices.
+
+Getting started with RB3 (also known as DB845c)
+-----------------------------------------------
+
+Learn about your RB3 board as well as how to prepare and set up for basic
+use from the
+`96boards DB845c getting started page <https://www.96boards.org/documentation/consumer/dragonboard/dragonboard845c/getting-started/rb3-kit/>`_.
+
+Make sure you are running AOSP (ptable compatible) bootloader on DB845c. Latest
+bootloader binaries (build #97 and above) are `hosted here
+<http://snapshots.linaro.org/96boards/dragonboard845c/linaro/rescue/>`_.
+
+For flashing instructions checkout
+`96boards DB845c recovery page <https://www.96boards.org/documentation/consumer/dragonboard/dragonboard845c/installation/board-recovery.md.html>`_.
+
+NOTE:
+
+You can also update bootloader binaries by running **flashall** script, which is
+a part of the vendor package of the RB3 AOSP build target. Boot in fastboot mode
+and run following command from your HOST machine::
+
+   git clone https://gerrit.devboardsforandroid.linaro.org/linaro-vendor-package
+   cd src/db845c/dragonboard-845c-bootloader-ufs-aosp/
+   ./flashall
+
+
+Install pre-built AOSP images on RB3
+------------------------------------
+
+Linaro create daily AOSP builds for DB845c that user can download, flash and
+boot from. If you are interested in prebuilt AOSP images for DB845c and want to
+avoid compiling your own, please download and flash boot.img, vendor_boot.img,
+super.img and userdata.img from
+`the snapshot here <http://snapshots.linaro.org/96boards/dragonboard845c/linaro/aosp-master>`_.
+
+Flash downloaded AOSP images by running following commands, while booted
+in fastboot mode::
+
+   fastboot flash userdata userdata.img
+   fastboot flash super super.img
+   fastboot flash vendor_boot vendor_boot.img
+   fastboot flash boot boot.img
+
+
+Compile AOSP from sources for RB3
+---------------------------------
+
+#. Download the AOSP source tree and build db845c-userdebug build target:
+
+::
+
+   repo init -u https://android.googlesource.com/platform/manifest -b master
+   repo sync -j`nproc`
+   ./device/linaro/dragonboard/fetch-vendor-package.sh
+   source ./build/envsetup.sh
+   lunch db845c-trunk_staging-userdebug
+   make -j`nproc`
+
+
+#. Install:  `Boot DB845c into fastboot mode <https://www.96boards.org/documentation/consumer/dragonboard/dragonboard845c/installation/board-recovery.md.html#booting-into-fastboot>`_ and run following command:
+
+::
+
+   ./device/linaro/dragonboard/installer/db845c/flash-all-aosp.sh
+
+You can also perform QDL board recovery by running following script after
+booting DB845c in `USB flashing mode <https://www.96boards.org/documentation/consumer/dragonboard/dragonboard845c/installation/board-recovery.md.html#connecting-the-board-in-usb-flashing-mode-aka-edl-mode>`_:
+
+::
+
+   ./device/linaro/dragonboard/installer/db845c/recovery.sh
+
+
+Building the kernel for RB3
+---------------------------
+
+The **Preferred** option is to build DB845c Android GKI kernel artifacts using
+official Bazel build. Run the following commands to clone the kernel source,
+prebuilt Android toolchains and build scripts.
+
+::
+
+   mkdir repo-db845c
+   cd repo-db845c
+   repo init -u https://android.googlesource.com/kernel/manifest -b common-android-mainline
+   repo sync -j`nproc`
+   tools/bazel clean
+   tools/bazel run //common:db845c_dist
+
+Now delete all the objects in
+$(AOSP_TOPDIR)device/linaro/dragonboard-kernel/android-mainline/, then copy
+build artifacts from out/db845c/dist/ to
+$(AOSP_TOPDIR)/device/linaro/dragonboard-kernel/android-mainline/
+
+If you want to properly test the GKI kernel, you should
+
+* grab the latest kernel_aarch64 build from
+  https://ci.android.com/builds/branches/aosp_kernel-common-android-mainline/grid?
+
+* under artifacts, download the Image.gz and copy it to
+  $(AOSP_TOPDIR)/device/linaro/dragonboard-kernel/android-mainline/
+
+Then rebuild AOSP using:
+
+::
+
+   make TARGET_KERNEL_USE=mainline -j`nproc`'